HeatKing BWarm 600 Air Source Heat Pump for Smaller Thermally Efficent Buildings
Sol Heat Air Souce Heat Pumps alow you to meet new local planning requirements for on site energy generation, the Bwarm 600 output is 66 percent renewable.
The HeatKing BWarm 600 Air Source Heat Pump is Ideal for heating smaller thermally efficent buildings.
The running cost of the BWarm 600 are lower than any fosil fuel system including natural gas.
The BWArm 600 extracts heat from the outside air compresses this low temperature heat and converts it into hot water which is used to power a conventional central heating system.
For every 1Kw of electricity that the heat pump consumes 3-4 kWh of heat are extacted from the atmosphere and circulated around the heating system.
The BWarm operates in outside temperatues down to -15°C.
- Heating Optimised
- Nominal 6kW output
- Up to 4.0 COP (Coefficient of Performance†)
- Low Energy Costs
- Provides high CO2 emissions savings
- Renewable Energy
- Low capital cost
- Easily installed
- Flexible sighting
- Operates down to -15°C
- Microprocessor control
- Latest compressor technology
- Incorporates circulating pump
†COP is the ratio of energy output to energy input.
It is essential that the property is thermally efficent and that the central heating system is designed to operate at 50°C.
B Warm 6000 Technical Specification |
|
Height (inc. feet) |
775mm |
Width |
1020mm |
Depth (inc. fan) |
345mm |
Weight |
87kg |
Heating output * |
6kW |
COP ** |
up to 4.0 |
Power Supply |
230V/1ph/50Hz or 400V/3ph/50Hz |
Cable specification |
Min. 2.5mm2 |
Water connector size |
22mm |
Minimum ambient temperature |
-15°C |
Maximum ambient temperature |
45°C |
